Beijing Zhenguang Technology Co., Ltd

Metal Film Precision High Voltage MELF Resistor (CSRP Series)

+
  • undefined

Metal Film Precision High Voltage MELF Resistor (CSRP Series)

PartNumberingFeatures· Thinfilmtechnology.· Highvoltageapplication.· SnterminationonNibarrierlayer.· Tighttolerancedownto±0.1%.· Highpowerratingupto1Watts.· SMDenabledstructure.· Lead-freeandRoHScompl

category:

MELF RESISTOR

Model :

VIKING25

  • Product description
  • Product parameters
  • Product parameters
    • Commodity name: Metal Film Precision High Voltage MELF Resistor (CSRP Series)
    • Commodity ID: VIKING25

    PartNumberingFeatures· Thinfilmtechnology.· Highvoltageapplication.· SnterminationonNibarrierlayer.· Tighttolerancedownto±0.1%.· Highpowerratingupto1Watts.· SMDenabledstructure.· Lead-freeandRoHScompl

    Features

    · Thin film technology.
    · High voltage application.
    · Sn termination on Ni barrier layer.

    · Tight tolerance down to ±0.1%.
    · High power rating up to 1 Watts.
    · SMD enabled structure.
    · Lead-free and RoHS compliant.

    Applications

    · Industrial.
    · Telecommunication.

    · Medical Equipment.
    · Measurement / Testing Equipment.

    Construction

    Dimensions (Unit: mm)

    Part Numbering

    Part Number:CSRP0204FTDG1004

    Recommend Land Pattern

    Standard Electrical Specifications

    Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower.
    Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower.
    RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.
    ☑ Viking is capable of manufacturing the optional spec based on customer's requirement.

    Pulse Withstanding Capacity

    The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied

    was subject to the restrictions of the maximum permissible impulse voltage graph shown.

    Continuous Pulse

    The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period

    was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value.

    Lightning Surge

    Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700us pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value.

    Product parameters

产品详情

Features

· Thin film technology.
· High voltage application.
· Sn termination on Ni barrier layer.

· Tight tolerance down to ±0.1%.
· High power rating up to 1 Watts.
· SMD enabled structure.
· Lead-free and RoHS compliant.

Applications

· Industrial.
· Telecommunication.

· Medical Equipment.
· Measurement / Testing Equipment.

Construction

Dimensions (Unit: mm)

Part Numbering

Part Number:CSRP0204FTDG1004

Recommend Land Pattern

Standard Electrical Specifications

Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower.
Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower.
RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.
☑ Viking is capable of manufacturing the optional spec based on customer's requirement.

Pulse Withstanding Capacity

The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied

was subject to the restrictions of the maximum permissible impulse voltage graph shown.

Continuous Pulse

The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period

was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value.

Lightning Surge

Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700us pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value.

Product parameters

Relevant accessories